Finishes · Catalonia

Wall skimming and removing textured plaster in Catalonia

Say goodbye to textured plaster and rough walls. We leave them perfectly smooth, ready for a flawless finish. It is the change that modernises an older home most, and it needs no major building work.

Fixed written quote
Fixeda written, itemised quote
One site managera single point of contact for the whole job
Freesite visit anywhere in Catalonia
Warrantyon the work
Wall skimming

The change that makes an old flat look new.

A great many Spanish flats of the 1970s to 1990s have gotelé — a rough, stippled plaster finish on walls and ceilings. It was cheap and hid imperfections, and it now dates a home instantly. Removing it and leaving smooth walls is the single change that modernises an older flat most for the money.

The job is a trade skill, and the result is in the sanding. The textured finish is either scraped off or covered with a skim coat of fine plaster, then sanded flat. Done well, the walls are smooth enough to take a dark matt paint without showing a flaw; done badly, every ridge shows under raking light.

The honest drawback is dust: sanding is dusty, and we contain it with sheeting and extraction, but you will not want to be living there. Painting follows naturally, so most people have the two done together: see painting and decorating. If the walls are damp, treat that first: damp treatment.

Premises under construction with an arch of plastered walls painted white beside large windows, green ventilation ducts on the wall and a strip of vertical light in the reveal
How it runs

Skimming walls, step by step.

A room in a day or two; a whole flat in one to two weeks.

01

Survey

We check the walls for damp, cracks and loose plaster, and agree what is to be smoothed.

02

Protection

Floors, doors, windows and furniture sheeted off.

03

Removing the texture

The stippled finish is scraped off or covered, depending on the state of the wall.

04

Skim coat

A thin coat of fine plaster applied to give a flat, even surface.

05

Sanding

Sanded smooth with dust extraction, which is what makes or breaks the result.

06

Primer

A primer so that the paint takes evenly.

07

Clean-up

The rooms cleaned and left ready for paint.

How we work

How we run a skimming job.

01

Free survey

We look at the walls. No cost and no obligation.

02

Fixed quote

A price per square metre or per room.

03

The work

Done in a planned order with dust contained.

04

Handover

Left primed and ready for paint, or painted if you want.

Why us

Why use us for skimming.

Properly sanded

The finish is in the sanding, and we spend the time.

Dust contained

Sheeting and extraction, because you still have to live there afterwards.

Damp checked first

We will not skim over a wet wall.

Walls and ceilings

Ceilings are usually what dates a home most.

Painted in one go

We can leave it primed or fully painted.

Fixed price

Per square metre or per room.

Prices

What skimming costs.

Per square metre, VAT excluded.

What skimming costs — Indicative prices · VAT not included
WorkWhat it coversPer m² (excl. VAT)
Skim (good condition)Standard finishes, practical solution10 – 18 €/m²
Skim and paintPremium materials and high-end interior design18 – 32 €/m²
Indicative prices · VAT not included. The price depends on the starting condition — how much texture or imperfection has to be covered — and on whether you paint afterwards. It is measured by the square metre or by the room. It is a skilled trade: the result is in the sanding.
Calculator

What might your renovation cost?

Floor area80 m²
20 m²300 m²
Indicative estimate800 – 1,400 €Skim (good condition) · 80 m²
Request a free quote →

Indicative only. VAT excluded. The final figure is a fixed written quote after the free survey.

Price by size

What it costs by size of job.

Indicative ranges, VAT excluded.

One roomBedroom or living room250 – 700 €

Smoothing one room, ready to paint.

Average flat70 – 90 m²2,000 – 5,000 €

Smoothing the whole flat, walls and ceilings. A radical change.

Ceilings onlyTextured ceilingsFrom 15 €/m²

Smoothing ceilings, which usually date a home most.

Skim and paintTurnkey18 – 32 €/m²

Smooth and painted, in one visit.

In an older building we treat the age of the coating as a precaution: some textured coatings in older buildings have been found to contain asbestos, so where the age makes it possible we test before sanding, and we do not sand anything we have not checked.

No small print

What is included and what is not.

The scope of a skimming job, and what is separate.

✓ Included in the price

  • Survey of the walls
  • Protection of floors and furniture
  • Removal of the textured finish, where itemised
  • Skim coat of fine plaster
  • Sanding with dust extraction
  • Primer
  • Cleaning
  • A written warranty

✕ Not included — quoted separately

  • Painting, unless itemised
  • Repairs to cracks that reveal structural movement
  • Damp treatment
  • Moving furniture out of the rooms
  • Council taxes and fees
  • Works needing the owners’ association’s consent

VAT is shown as its own line — 10% or 21% depending on your case.

Where we work

Where we skim walls.

Across Barcelona and Catalonia. Find your town.

Service areaRest of Catalonia

Official boundary data for comarques and municipalities (ICGC, 2025).

Common questions

Frequently asked questions

What owners ask about skimming.

How is the textured finish (gotelé) removed?

Either scraped off, after dampening it, or covered with a skim coat of fine plaster, depending on how well it is stuck. Then the wall is sanded flat and primed. Scraping gives the flattest result but depends on what is underneath; skimming over is more forgiving. We choose after testing a patch.

Is it dusty?

Yes, sanding creates dust. We contain it with sheeting over doors and furniture and use extraction, so it stays in the room being worked on. You will still not want to live there that day, and we plan around that.

Is it worth skimming instead of just painting?

If the walls are rough, yes. Paint over texture leaves the texture, and in raking light it shows. Smooth walls make the whole flat look modern and take paint better, and the difference is large compared with the cost.

How much does it cost to skim a flat?

Roughly 2,000 to 5,000 € for an average 70 to 90 m² flat, walls and ceilings, excluding VAT, depending on the condition. Per square metre it is about 10 to 25 €.

Can you paint it afterwards?

Yes. Most people have it done in one visit, which saves time and gives a better finish. Skim and paint together is about 18 to 32 €/m².

Free quote

Get a quote for skimming.

Free survey anywhere in Catalonia. A fixed price, with dust contained.

Your details

Your project

Where it is

Budget and timing

Tell us more

How you would like us to get in touch

Reply within 24 working hours · Free site visit · No obligation

✆ Call✦ WhatsAppGet a quote →