A clinic has to be renovated to satisfy the health authority: hygiene, easy-to-clean materials, specialist services and accessibility to obtain its authorisation — and to look like somewhere a patient trusts.
A clinic is judged twice: by the health authority, which decides whether you can operate, and by the patient, who decides within thirty seconds whether to trust you. Both are influenced by the building. The authority cares about hygiene, finishes that can be cleaned and disinfected, specialist services and accessibility. The patient cares about whether the waiting room feels calm and the treatment room feels clean.
The surfaces matter more than people expect. Seamless, coved flooring, wipeable walls, no joints where dirt collects, and sinks and taps that meet the specialty’s requirements. Behind them sit the services that depend on the specialty: medical gases, radiation protection for X-ray rooms, dental surgeries, and the ventilation and air quality that go with them.
The route to opening runs through a health authorisation, which is applied for with a technical project and inspected. The building work has to match it. We coordinate registered technicians for the project, build to it, and hand over with the certificates the inspection asks for. For the pharmacy next door, see pharmacies; for the general process, commercial unit fit-out.

Typically eight to sixteen weeks, depending on the specialty. The health authorisation runs in parallel and often sets the opening date.
We establish the specialty, the rooms you need and the services each depends on, and assess what the premises can support.
A registered technician drafts the technical project for the health authorisation, and we help file it.
Previous fit-out out, services located, and any structural work for specialist rooms.
Medical gases, radiation protection, dental services, electrics with certification and ventilation, as your specialty needs.
Seamless flooring, wipeable walls and ceilings, and sinks and taps to the specialty’s requirements.
The rooms and their finish and lighting, with accessible routes throughout.
Certificates, inspection and handover.
We visit and talk through your specialty and your patients. No cost and no obligation.
A fixed itemised quote, with the health project shown separately.
One site manager coordinates every trade, including the specialist installers.
Certificates and documents for the authorisation.
The finishes and services are specified to what the health authority will inspect.
Seamless, cleanable surfaces and detailing that leaves nowhere for dirt to collect.
Medical gases, radiation protection and dental services handled by the right specialists under one site manager.
Routes, doors and toilets to the current standard.
Lighting and materials that make the practice feel professional.
We tell you when the authorisation, not the build, is the constraint.
Per square metre of floor area, VAT excluded. Specialist equipment is separate.
| Specification | What it covers | Per m² (excl. VAT) | |
|---|---|---|---|
| Consulting rooms | Standard finishes, practical solution | 600 – 900 €/m² | |
| Mid-size clinic | Selected materials, best balance | 900 – 1,400 €/m² | |
| Highly specialised | Premium materials and high-end interior design | 1,400 – 2,500 €/m² |
Indicative only. VAT excluded. The final figure is a fixed written quote after the free survey.
Indicative ranges, VAT and equipment excluded.
Individual or small practices. Hygiene and accessibility set the minimum.
Several treatment rooms, a waiting area and sterilisation. The most common size.
Polyclinics and centres with larger installations.
Medical gases, radiation protection or dental surgeries, priced by specialty.
Specialist equipment — chairs, imaging, sterilisers — is bought from its own suppliers, who also dictate the services it needs. We coordinate with them early, because a unit that arrives needing a different connection from the one built is a costly mistake.
The scope of a turnkey clinic fit-out, and what is separate.
VAT is shown as its own line — healthcare premises are normally 21% on works, and we confirm in writing.
A clinic draws on most of this list, coordinated by one person.
Clinics in Barcelona and across Catalonia. Find your town.
Official boundary data for comarques and municipalities (ICGC, 2025).
What clinic owners ask.
A technical project that shows the premises meet the requirements for your specialty, an inspection, and a building that matches the project. The requirements depend on what you do: a consulting room is far lighter than a surgery. We coordinate registered technicians for the project and build to it. The authorisation process is outside our control, so we plan the programme around it and tell you when it is the constraint.
Yes, with the right specialists. Dental surgeries need compressed air, suction, drainage and equipment-specific connections. An X-ray room needs radiation protection designed by a qualified person, with shielding in the walls and door. We coordinate the specialists and the equipment suppliers so that what is built matches what is delivered.
Seamless, coved flooring with no joints where dirt collects, walls and ceilings that can be wiped and disinfected, and sinks and taps suited to the specialty. The detail matters more than the material: junctions, corners and penetrations are where hygiene fails.
Roughly 600 to 900 €/m² for consulting rooms, 900 to 1,400 €/m² for a mid-size clinic and 1,400 to 2,500 €/m² for a highly specialised one, excluding VAT and equipment. A 100 m² clinic at mid-size comes to around 90,000 to 140,000 € for the works.
Eight to sixteen weeks of building, depending on the specialty. The authorisation runs in parallel and often sets the opening date.
In stages tied to completed work: a deposit on signing, payments at the end of each phase, and a final payment at handover. Never the full amount in advance.
Practical guides to prices, materials, permits and the decisions that come up on site — so you can plan your flat refurbishment with your eyes open.
10,000 € buys a bathroom or a kitchen; a 60 m² flat starts at 34,400 € at functional level. What each budget covers up to 150,000 €, before VAT.
Read the article →Guides and adviceWhat a technical architect (aparejador) charges in Spain in 2026: fee percentages, fixed prices, what drives the cost and when hiring one is compulsory.
Read the article →Full renovationsWhat an architect charges for a renovation in 2026: typical rates, fees as a share of the PEM budget and how to keep the total under control.
Read the article →Free survey anywhere in Catalonia. Built to the health authorisation.