Plasterboard lets you re-plan, insulate and hide services quickly, cleanly and without heavy building work. We build partitions, suspended ceilings, wall linings and every sort of dry-lining solution.
Plasterboard — pladur in Spanish — is the standard way to build lightweight walls and ceilings. Metal frames are fixed to the structure, boards are screwed to them, and the joints are taped and plastered. There is no wet trade, so it is fast, clean and dust-light compared with brick, and it can hide pipes, cables and ducts behind a flat surface.
It does four jobs. Partitions divide space, with insulation inside for sound. Suspended ceilings drop the ceiling to hide services, to take recessed lighting and to improve acoustics. Wall linings go in front of a party wall or an exterior wall to add acoustic or thermal insulation. And bespoke details — niches, headboards, curved forms and boxed-in beams — are easily made.
The honest limits: plasterboard does not carry structural loads, and a wall with only plasterboard on it needs the right fixings to hold a heavy shelf or television. Where the wall needs to hold weight, it is reinforced behind with timber or a metal plate. For brick and block partitions see building work, and for sound between neighbours, terraced houses.

A day or two for a ceiling or a partition; a week for a whole flat.
We mark out the walls and ceilings and agree heights, services and lighting.
Metal tracks and studs fixed to the floor, walls and ceiling.
Cables and pipes run, and insulation placed in the cavity.
Boards fixed, with moisture-resistant or fire-rated boards where needed.
Joints taped and plastered, and sanded smooth.
Ready for paint, or with a primer.
We measure and discuss what you want. No cost and no obligation.
A price per square metre.
Quick and clean.
Left ready for paint.
Partitions and linings built to cut sound, not just divide space.
Lighting and cables considered before the ceiling closes.
Moisture-resistant, fire-rated or acoustic where it matters.
The difference between a flat ceiling and one that shows its seams.
Little dust and quick progress.
Niches, curves and boxed-in features.
Per square metre, VAT excluded.
| Work | What it covers | Per m² (excl. VAT) | |
|---|---|---|---|
| Plain suspended ceiling | Standard finishes, practical solution | 20 – 40 €/m² | |
| Plasterboard partition | Selected materials, best balance | 30 – 55 €/m² | |
| Acoustic wall lining | Premium materials and high-end interior design | 35 – 60 €/m² |
Indicative only. VAT excluded. The final figure is a fixed written quote after the free survey.
Indicative ranges, VAT excluded.
Lowering the ceiling, hiding services or creating indirect lighting.
Dividing partitions with sound insulation inside.
Thermal or acoustic insulation to a wall or party wall.
Shelving, headboards, niches and curved forms.
A partition between two flats or a party wall needs more than a single board if you want real sound insulation. We specify the mass and the insulation, and say honestly what to expect.
The scope of a plasterboard job, and what is separate.
VAT is shown as its own line — 10% or 21% depending on your case.
Plasterboard connects partitions, ceilings and insulation.
Across Barcelona and Catalonia. Find your town.
Official boundary data for comarques and municipalities (ICGC, 2025).
What owners ask about plasterboard.
It can, if it is built for it. A single board on a single frame stops little. A partition with a double layer of board on each side and mineral wool in the cavity performs far better, and a lining in front of a party wall, with an air gap and insulation, can transform it. We specify according to the problem and say honestly what you will get.
Light things, with the right plugs. Heavy items — a television, shelving, a kitchen cabinet — need reinforcement behind the board, usually timber or a steel plate, which we build in during the work. It is much easier to do it when the wall is open.
To hide pipes, ducts and cables, to take recessed lighting, to improve acoustics and to lower a very high ceiling. It also covers a damaged or uneven ceiling. The cost is some headroom, so we check the height before we specify.
Roughly 20 to 40 €/m² for a plain suspended ceiling, 30 to 55 €/m² for a partition and 35 to 60 €/m² for an acoustic lining, excluding VAT.
Yes — considerably. There is no wet trade and no long drying time, so partitions and ceilings go up in a day or two and can be painted straight after the joints are dry. It is also much cleaner.
Practical guides to prices, materials, permits and the decisions that come up on site — so you can plan your flat refurbishment with your eyes open.
10,000 € buys a bathroom or a kitchen; a 60 m² flat starts at 34,400 € at functional level. What each budget covers up to 150,000 €, before VAT.
Read the article →Guides and adviceWhat a technical architect (aparejador) charges in Spain in 2026: fee percentages, fixed prices, what drives the cost and when hiring one is compulsory.
Read the article →Full renovationsWhat an architect charges for a renovation in 2026: typical rates, fees as a share of the PEM budget and how to keep the total under control.
Read the article →Free survey anywhere in Catalonia. Acoustic and fire ratings specified for the use.