In a bar the counter is the stage and the atmosphere is everything, but behind it sit the technical works: extraction, soundproofing to the neighbours, accessible toilets and an activity licence you must meet to open.
The atmosphere of a bar is made of things customers notice without analysing: the light, the counter, the music and the materials. It is also made of things they never see, and these are what decide whether you can stay open. Chief among them is sound: a bar below flats lives or dies by how well the ceiling and the party walls contain it.
Next is extraction. A bar that only pours drinks needs less than a restaurant, but one that serves food needs a way of getting fumes to the roof, and that can be a hard item in an existing building. The rest is the layer of requirements that applies to any public venue: accessible toilets, fire protection, ventilation and a capacity limit set by the activity project.
A bar is generally cheaper per square metre than a restaurant, because there is less kitchen, and a unit that was a bar before starts ahead. We build the counter to measure, design the lighting in scenes, and put the acoustic work where it counts. If you are planning a kitchen-led venue, see restaurants; for a daytime café, cafés.

Six to fourteen weeks of building. The activity licence runs in parallel and often sets the opening date.
Before you sign: the neighbours above and beside, the extraction route if you will serve food, and the unit’s previous use.
A registered technician drafts the activity project and we file it with the council.
Previous fit-out out and services located.
Insulation to ceiling and party walls, a floating floor where needed and quiet ventilation.
Electrics, lighting, plumbing, drainage, ventilation, air conditioning and, if you serve food, extraction.
The bespoke counter, accessible toilets, seating, lighting scenes and finishes.
Final certificates and technician’s sign-off, then handover on the agreed date.
We visit before you commit and tell you what the unit needs and whether the neighbours are likely to be a problem.
A fixed itemised quote, with the activity project shown separately.
One site manager coordinates the trades against a written programme.
Certificates and the documents you need to open lawfully.
The acoustic work is specified first, because it is what protects your licence.
Made for your workflow and your look, not chosen from a catalogue.
Accessible toilets, fire protection and capacity limits sorted in the activity project, before the finishes.
Layered lighting in scenes, because it does more for atmosphere than any finish.
Every trade coordinated by one person.
We tell you at the survey if the unit’s position makes the noise a real risk.
Per square metre of floor area, VAT excluded. Equipment is separate.
| Specification | What it covers | Per m² (excl. VAT) | |
|---|---|---|---|
| Basic fit-out | Standard finishes, practical solution | 500 – 800 €/m² | |
| Mid-range | Selected materials, best balance | 800 – 1,300 €/m² | |
| Designer / high-end | Premium materials and high-end interior design | 1,300 – 2,000 €/m² |
Indicative only. VAT excluded. The final figure is a fixed written quote after the free survey.
Indicative ranges for the building works, VAT and equipment excluded.
Neighbourhood and tapas bars. The counter, accessible toilets and soundproofing set the minimum.
The most common size, with a counter, a seating area and a back-of-house room.
Large venues or those with a full kitchen. Extraction and air conditioning on a larger scale.
The project and supervision for the licence, quoted separately.
Opening hours and music are set by the licence and your neighbours, not by what you would like. A bar below flats has the strictest limits and the highest risk, and it is worth being clear-eyed about that before you take the unit.
The scope of a turnkey bar fit-out, and what is separate.
VAT is shown as its own line — normally 21% on works for a business.
A bar draws on most of this list, coordinated by one person.
Bars in Barcelona and across Catalonia. Find your town.
Official boundary data for comarques and municipalities (ICGC, 2025).
What bar owners ask before fitting out.
By building the acoustic work properly and by being realistic about the venue’s position. Acoustic insulation to the ceiling and party walls, a floating floor where there are flats above and a quiet ventilation system are the foundation. Beyond that, limit the sound inside the licence, control the doors and the pavement. A bar below flats is the highest-risk configuration there is, and the survey will tell you honestly how risky yours is.
Only if you cook. A bar that serves drinks and cold food needs ventilation but not full fume extraction; one that fries or grills does, and needs a route to the roof. Establishing which you are is the first step, because it affects both the licence and the cost. If a kitchen is part of the plan, see restaurants.
Roughly 500 to 800 €/m² for a basic fit-out, 800 to 1,300 €/m² for mid-range and 1,300 to 2,000 €/m² for a designer scheme, excluding VAT and equipment. A 100 m² bar at mid-range comes to around 80,000 to 130,000 € for the works. The activity project is on top.
Yes, and we recommend it. The counter is the centre of a bar’s operation and its look, and a bespoke one built around your workflow — the position of the taps, the fridges and the till — is far better than a catalogue unit adapted to fit. We design it with you and build it as part of the fit-out.
Six to fourteen weeks of building, depending on size and on the acoustic work. The licence runs in parallel and often sets the opening date, and we tell you honestly when that is the case.
In stages tied to completed work: a deposit on signing, payments at the end of each phase, and a final payment at handover. Never the full amount in advance.
Yes. For a bar the things that matter most — the neighbours, the extraction route and the unit’s previous use — are invisible in a listing and decide whether the venue is viable. Ask for a survey.
Practical guides to prices, materials, permits and the decisions that come up on site — so you can plan your flat refurbishment with your eyes open.
10,000 € buys a bathroom or a kitchen; a 60 m² flat starts at 34,400 € at functional level. What each budget covers up to 150,000 €, before VAT.
Read the article →Guides and adviceWhat a technical architect (aparejador) charges in Spain in 2026: fee percentages, fixed prices, what drives the cost and when hiring one is compulsory.
Read the article →Full renovationsWhat an architect charges for a renovation in 2026: typical rates, fees as a share of the PEM budget and how to keep the total under control.
Read the article →Free survey, including before you sign the lease. Soundproofing assessed first.