Changing the floor transforms a whole home and often needs no building work and only a few days. We advise on which material suits your use, your budget and the floor you start with.
The floor is the largest surface in a home and the one that sets its character. A continuous, consistent floor makes a flat look larger and calmer; a patchwork of different finishes does the opposite. And it is one of the few renovations that can be done without demolition, laid over the existing floor, in a few days.
The materials fall into four families. Laminate and vinyl are the economical and quick options, and modern vinyl is waterproof. Porcelain is the durable all-rounder, hard and easy to clean, and can imitate timber convincingly. Timber — engineered, parquet or solid — is the warmest and can be sanded and refinished. And microcement gives a seamless continuous floor: see microcement.
Whichever you choose, the base decides how it performs. A floor laid on an uneven or damp slab will creak, crack or lift, and levelling or damp treatment beforehand is part of the honest price. Laying over the existing floor saves money and time, but adds height, which matters at doors and thresholds. For fitted timber, see joinery and carpentry.

A day or two for a room; three to seven days for a whole flat.
We check the existing floor, the levels, the damp and the thresholds, and agree the material.
The old floor is lifted, or the new one laid over it if it is sound.
The base levelled and, if needed, damp-proofed.
An underlay for acoustic and thermal performance, and to protect a floating floor.
The floor laid with expansion gaps where needed, and the pattern set out so cuts are balanced.
Skirting fitted and transitions at doors detailed.
Cleaned and explained, with care instructions.
We check the base and show samples. No cost and no obligation.
A price per square metre, with base preparation itemised.
Quick and clean, room by room if you are living there.
Warranty and a care guide.
Because it decides whether the floor lasts.
We recommend according to your use, not the margin.
Laid over a sound floor to save time and money.
The height and the junctions at doors handled properly.
We lay out so cuts are balanced and joins are discreet.
With base preparation itemised.
Per square metre, supplied and laid, VAT excluded.
| Material | What it covers | Per m² (excl. VAT) | |
|---|---|---|---|
| Laminate / vinyl | Standard finishes, practical solution | 25 – 50 €/m² | |
| Porcelain / stoneware | Selected materials, best balance | 40 – 90 €/m² | |
| Timber / microcement | Premium materials and high-end interior design | 70 – 140 €/m² |
Indicative only. VAT excluded. The final figure is a fixed written quote after the free survey.
Indicative ranges, VAT excluded.
A living room or a couple of bedrooms. Good for renewing room by room.
A full day zone or night zone. The change is very noticeable.
The whole home in one continuous floor, which adds a sense of space.
A quick change laid over the existing floor, with no rubble.
Laying over an existing floor raises the level by a few millimetres to a couple of centimetres, which affects doors, thresholds and appliances. We measure it at the survey. Underfloor heating also changes what you can lay, because some materials insulate.
The scope of a flooring job, and what is separate.
VAT is shown as its own line — 10% or 21% depending on your case.
Flooring connects levelling, heating and joinery.
Across Barcelona and Catalonia. Find your town.
Official boundary data for comarques and municipalities (ICGC, 2025).
What owners ask about flooring.
Often, yes, if the old floor is sound, flat and well stuck. It saves demolition, rubble and days of work, and costs from about 25 €/m². The price is height: the new floor raises the level, which affects doors and thresholds. If the old floor is loose or damaged, it has to come up first.
It depends on the use. Porcelain is the durable all-rounder for kitchens, bathrooms and high-traffic areas. Timber is warmer and can be refinished but marks more easily. Vinyl is economical, quiet and waterproof. Laminate is cheap and quick but sensitive to water. We recommend by room and by how you live.
Roughly 3,500 to 11,000 € for 50 to 100 m², excluding VAT, depending on the material and the base. Laminate or vinyl is at the low end, timber or microcement at the high.
A day or two for a room; three to seven days for a whole flat. Timber and microcement need extra drying time for the base and the finish.
We lay room by room, so you can usually stay, but furniture has to be moved out of the room being done. Clearing the rooms makes it faster and cheaper.
Practical guides to prices, materials, permits and the decisions that come up on site — so you can plan your flat refurbishment with your eyes open.
10,000 € buys a bathroom or a kitchen; a 60 m² flat starts at 34,400 € at functional level. What each budget covers up to 150,000 €, before VAT.
Read the article →Guides and adviceWhat a technical architect (aparejador) charges in Spain in 2026: fee percentages, fixed prices, what drives the cost and when hiring one is compulsory.
Read the article →Full renovationsWhat an architect charges for a renovation in 2026: typical rates, fees as a share of the PEM budget and how to keep the total under control.
Read the article →Free survey, base check and samples anywhere in Catalonia.