Installations

What is underfloor heating?

By the Tu Nuevo Piso teamPublished 13 July 202611 min read

Key points to know today:

  • Natural radiant heat: It spreads warmth evenly from the floor upwards, following the comfort profile that suits the human body.
  • Savings and efficiency combined: Because it runs on low-temperature water (between 30°C and 45°C), it is an ideal partner in full home renovations that use efficient systems.
  • Usable space freed up: It removes wall radiators altogether, which can gain up to 5% of usable floor area and leaves interiors completely clear.
  • Cooling in summer: If it is paired with reversible heat pumps, the same circuit can cool your home in hot weather without draughts.

Why does underfloor heating beat traditional radiators on physics?

To really understand why this technology feels so good, a short dose of basic physics helps. Most traditional homes are heated by wall radiators or air conditioning split units. These emitters work almost entirely by convection. They heat the air directly around them. That air rises quickly to the ceiling because it is less dense, cools on touching the high surfaces, sinks down the far side of the room and comes back to our feet as a cold draught. The real result is an inverted temperature map: your head at twenty-four degrees and your feet at sixteen.

The invisible alternative breaks this inefficient pattern. Heat does not travel mainly by warming pockets of air, but by direct radiation. By heating the whole floor surface evenly, the thermal waves warm solid objects, furniture and you yourself, without needing to overheat the air in the room. The heat distribution closely resembles the ideal comfort curve for our physiology: warmer at floor level and a gentle drop at head height. Because there are no violent air currents, dust does not get stirred up and breathing passages do not dry out, which is a huge benefit for people with asthma and severe allergies.

There is another technical factor that engineers value above all: water temperature. An old radiator needs boiler water at seventy or eighty degrees to give enough output from such a small metal surface. Underfloor heating, which covers the full extent of the floor, only needs water pumped at thirty or forty-five degrees to achieve the same ambient feeling. Working at low temperatures means your heat generator has far less work to do, and that translates into a sharp drop in monthly electricity consumption.

The two routes: water-based versus electric underfloor heating

When someone decides to switch to invisible climate control, the first step is to assess the technical feasibility and how the home is used. There are two main constructive versions of underfloor heating, each with a very different physical operation and installation cost. The most widespread system in homes is the hydronic or water circuit. It consists of a continuous network of flexible plastic pipes, in cross-linked polyethylene or multilayer, laid methodically on high-density insulation boards. These boards are then covered with a layer of cement or anhydrite mortar, which absorbs the heat and distributes it evenly across the floor.

The other option is the electric variant, made of carbon films or metal meshes with built-in resistance that connect directly to the home's electricity supply. The great advantage of the electric system is how thin it is. It hardly adds any height to the floor, which makes it very quick and cheap to fit over an existing slab. However, and this is a critical point, running the heating of a whole home purely on direct electricity is an expensive mistake given the high energy prices in Spain. For that reason we advise against heating an entire residence with electric mats.

The electric option makes sense when it is reserved for specific areas of the home. For example, placing a small mat under the tiles of a bathroom gives you a pleasantly warm floor in the morning without switching on the general heating. For the rest of the house, if you want efficient, low-consumption climate control over the long term, water remains the clear choice because of how easily it connects to clean energy sources.

Underfloor heating and heat pumps: the 2026 golden pairing

Combining water-based underfloor heating with modern aerothermal equipment has become the standard system for maximum comfort with low energy use. When we explain what aerothermal energy is to homeowners, we stress that it is a technology that extracts free thermal energy from the outside air to produce hot or cold water. Heat pumps reach their best efficiency when working at moderate temperatures, which is exactly the range in which our invisible climate circuit operates.

To give you a quick idea of the numbers, a modern 2026 aerothermal unit can deliver four or five kilowatts of useful heat for every kilowatt of electricity consumed when running at low temperature. If you paired this heat pump with traditional radiators that need seventy degrees, efficiency would drop sharply and bills would suffer noticeably. A hybrid solution is therefore key to a sustainable and comfortable home, and it is worth planning efficient climate control in a renovation from the first mechanical drawings.

The other big benefit of this partnership shows up during the scorching summer heatwaves. Because these systems are fully reversible, cold water at around seventeen degrees can be pushed through the floor pipes. The cooling floor gently absorbs excess radiant heat from the room. The result is remarkably pleasant, natural climate control with no fan noise. But this cooling mode demands careful technical control. In coastal or high-humidity areas, such as Barcelona, the installation must include intelligent control to regulate the dew point, along with dehumidifiers that prevent annoying surface condensation on the floor.

Advantages and limits of floor heating: a realistic view

Professionals should always show both sides of the coin. Underfloor heating is wonderful, yes, but there is no perfect solution for every lifestyle or every type of property. Below we set out the practical advantages and disadvantages to weigh up before you make a final decision on your project.

Undeniable benefits

  • Savings on the energy bill: Its continuous operation at low temperature can cut your usual energy consumption by between 20% and 30% compared with conventional gas radiators.
  • Complete freedom in interior design: By removing those old metal emitters from the walls, you free up valuable square metres to arrange your furniture, shelves or sofas with no physical constraints.
  • Hygiene and less dust mite allergen: Without strong convective air currents, dust particles do not float around the room, which sharply reduces allergies and stops those ugly black marks forming on the upper walls.
  • Uniform comfort throughout: Excessively hot spots and cold corners near large windows disappear, and the whole home keeps a uniform temperature from floor to ceiling.

Drawbacks and limits to consider

  • Long thermal lag: The hot water first has to warm several tonnes of concrete screed before you feel the heat in the room. The process takes hours. This means it is not suitable for weekend second homes where you want a quick warm-up on Friday night.
  • High upfront cost: The budget for installing the pipes, floor insulation, distribution manifolds and screed is noticeably higher than that of hanging a few radiators or fitting simple split units.
  • Construction complexity: It needs precise planning of the concrete screed and its mandatory drying period, which noticeably extends the works timeline.

Underfloor heating in renovations: the challenge of height and weight

Is it technically feasible to install underfloor heating during the renovation of an older flat? The short answer is yes, but it requires a detailed architectural assessment of the floor slab's structural loads and the free height of the ceiling. When you consider what a full renovation involves, thermal comfort must line up perfectly with the building's structural safety. A traditional water system is quite heavy and needs a screed thickness of between eight and ten centimetres in total. That means trimming door frames, relocating switches and, in some cases, it can compromise the clear height required by the habitability certificate (cédula de habitabilidad).

To solve these building challenges, the market has moved on considerably. In 2026 there are excellent low-profile or "dry" systems. These drop the thick mortar screed and use super-thin preformed insulation panels, only fifteen or twenty millimetres thick. The smaller-diameter pipes snap directly into aluminium heat-distribution grooves in these panels, and the final flooring is laid straight over them as a floating floor. The weight falls to a tenth, and they take up very little usable height.

But if your only aim is to change the floor without major works, be aware that lifting the existing flooring to embed a wet water circuit does not always pay off. In those specific cases, a good technical adviser can help you decide whether a thin dry system or an efficient split unit is the most sensible option for your household budget.

Conductivity and finishes: which floor covering to choose

Not every material we walk on conducts heat at the same rate. The thermal resistance of the final floor covering is crucial to how efficiently your home absorbs energy from the pipes below. For pure heat transmission, ceramic tiles and porcelain are by far the best finishes possible. They have very low thermal resistance, which lets heat rise freely, and they store a lot of heat, keeping the home warm for hours after the system is switched off. In line with minimalist interior design trends, the use of continuous floors such as microcement in Barcelona has grown rapidly, and it is an excellent thin heat conductor.

But what if you want to install natural wood or laminate flooring? Do not worry, it is entirely feasible and suitable for this heating, but it needs serious technical precautions. Wood acts as a natural insulator, so heat takes a little longer to reach the surface. If you choose this aesthetic, make sure the laminate or parquet manufacturer explicitly certifies compatibility with radiant heating, which guarantees low thermal resistance. In addition, to prevent the wood from shrinking or joints from distorting, the water temperature in the pipes must be monitored so that the floor surface never exceeds twenty-seven degrees Celsius.

Comparison table of common climate control systems

To help you see the technical and practical differences between modern climate control options, here is a realistic comparison table:

FeatureTraditional water floorDry water floor (low profile)Electric underfloor heatingTraditional radiators
Thickness required8 - 10 cm2 - 3 cm0.5 - 1.5 cmNone on the floor
Thermal lagVery high (4-12 hours)Medium-low (1-2 hours)Low (under 1 hour)Low (quick response)
Monthly consumptionVery low (high efficiency)Very lowHigh (if heating the whole home)Medium-high (high temperature)
Summer coolingYes (with reversible aerothermal)Yes (with control limitations)No (heating only)No
Upfront investmentHighVery high (specific panels)Moderate (quick to install)Low-moderate

Budget and payback: is it really worth it?

Let us put the numbers on the table. A full hydronic underfloor heating installation is typically budgeted at between sixty and ninety euros per usable square metre of screed, depending on the insulation panel chosen, the length of the pipe runs and the electronic control system. When you work out how much a flat renovation costs to test whether the investment makes sense, it is essential to avoid a short-term view of the upfront spending. This installation significantly adds to the market value of your property and noticeably improves the energy certificate of your home, which matters for legal compliance when renting or selling.

The average return on investment falls in a range of between five and eight years of continuous use. That money comes back to your pocket month after month, thanks to the sharp drop in electricity use delivered by aerothermal heating running at low temperature. Also, if you entrust your project to licensed professionals, you may be able to claim tax benefits and state reliefs such as the reduced 10% VAT rate on renovations for both labour and materials, as long as the current energy-saving rules and general legal requirements are met.

Frequently asked questions about underfloor heating

We know that planning your home's design raises many technical questions. So here we answer the four doubts that come up most often.

Is underfloor heating bad for varicose veins or poor circulation?

No, not at all. This is an old myth, deeply rooted in Spain, that comes from the days when diesel or coal boilers were installed without control. Those systems pushed water above fifty degrees with no mixing electronics, dangerously overheating the floor surface for people's legs. In 2026, the strict UNE-EN 1264 standard limits the maximum surface temperature of floors in occupied areas to twenty-nine degrees. At that gentle temperature, which is well below body temperature, there is no vein dilation or discomfort for varicose veins.

How long does a home really take to warm up from cold?

Traditional wet water systems have high thermal inertia and need between four and twelve hours to reach the optimum requested temperature. The inertia means the concrete mass covering the pipes has to heat up completely before it gives off pleasant radiant heat into the room. However, today's smart thermostats reduce this problem by scheduling early switch-on based on the outside weather. For renovations that cannot wait, dry systems have no wet mortar and heat spaces in less than an hour.

Can I place rugs and heavy furniture on top of the floor?

Of course, though there are some practical points. Very thick, large rugs act as thermal screens, blocking the upward radiation from the floor into the room. It is advisable not to cover more than forty percent of the floor with dense textiles, to avoid losing overall heating performance. As for heavy furniture, choose designs with raised legs or simple plinths that let the radiant heat flow smoothly.

What kind of preventive maintenance does this system need?

Unlike metal radiators, which must be bled by hand every winter, hydronic underfloor heating needs fairly low but technical maintenance. Every five or six years, it is advisable to flush the internal circuits with pressurised water and special protective products to remove sludge and bacteria that build up in the metal manifolds. It is also key to check the pressure of the expansion vessel and the tightness of the manifold joints, so that the system keeps performing well for decades.

Explore more and recommended resources

If you want to start planning the invisible climate control of your home, the expert team at Tu Nuevo Piso can guide you through every stage of design, structure and engineering. You can always get in touch with us for an analysis of your home, to resolve any remaining construction questions, or to receive qualified assistance in the province of Barcelona and nearby areas.

How underfloor heating works, in short? A network of pipes (water) or cables (electric) under the floor warms the floor mass, and that warm surface radiates even heat from below upwards. That is why it feels more comfortable at a lower temperature than a radiator.

Keep reading

✆ Call✦ WhatsAppGet a quote →