REBT and ITC-BT home electrical rules: a practical guide
Which rules govern the electrical installation of a home, and what power do they require?
The electrical installation of a home is governed by the Low Voltage Electrotechnical Regulation (Royal Decree 842/2002) and, for the internal circuits, by its instruction ITC-BT-25. A new home must provide for at least 5,750 W with basic electrification and at least 9,200 W with elevated electrification, which applies, among other cases, to homes of more than 160 square metres or with electric heating or air conditioning.
Imagine planning the layout of your dream kitchen, choosing flawless tiles, bespoke furniture and top-quality appliances. Then, on the day you move in, you switch on the induction hob and the electric oven and the power trips. Or, worse still, you notice a faint smell of burnt plastic behind the plasterboard. This is not an electrician trying to scare you. It is everyday life in homes that undertake partial renovations while ignoring the hidden technical side. The whole internal network, from the thickness of the cable to the circuit breakers in the consumer unit, is regulated by the Low-Voltage Electrotechnical Regulation (REBT). This legal framework, enacted in 2002 through Royal Decree 842/2002 and constantly revised, is the referee of safety in our homes. In 2026, the widespread installation of aerothermal systems and electric vehicle chargers has changed the rules of the game. So knowing instruction ITC-BT-25 is no longer optional. It is an absolute necessity if your home is to be habitable, safe and legal.
When you get stuck into a renovation, it is easy to be carried away by decoration and aesthetic trends. But neglecting the electrical wiring can bring considerable administrative fines, refusals from energy distributors and serious fires. The regulation is not a random bureaucratic obstacle. It is a robust safeguard for your physical wellbeing. That is why this practical guide turns the complex language of the Official State Gazette into everyday decisions you can discuss with the electrician who visits your home.
- The REBT rules: The regulation governs every technical and physical safety aspect, protecting both appliances and the structure against thermal overloads and serious fires.
- Electrification grades: The permitted power is not an arbitrary choice. The regulation strictly distinguishes between basic electrification (a power to be provided for of at least 5,750 W at 230 V in a new home) and elevated electrification (at least 9,200 W).
- Mandatory circuits: ITC-BT-25 sets out in detail how internal cabling must be organised to avoid voltage drops.
- Complex projects: Whenever you tackle a full home renovation, it is a technical requirement to evaluate the whole installation so the wiring can be adapted.
What is the Low-Voltage Electrotechnical Regulation (REBT) and why does it govern your home?
The Low-Voltage Electrotechnical Regulation is the legal text that governs the design of low-voltage residential electrical networks in Spain. Its main purpose is to set out the technical conditions and the essential safety guarantees that the connection infrastructure and internal circuits must meet. The REBT lays down strict rules on the nature and quality of conductors, separation distances from parallel metal pipes (gas, water) and mandatory quick-disconnection devices. As new digital technologies and more ecological heating systems have become established, this document has been supplemented by additional guidelines suited to the new high-efficiency residential model. So when a home is renovated, the authorised installer must certify that everything installed complies with the technical regulation in order to legalise the changes.
Electrification grades: basic or elevated? The main dividing line
To size a home in line with the law, the first step is to understand the electrification grades defined in ITC-BT-10 and developed in ITC-BT-25. A common mistake is to think you can choose the number of sockets or the pipe size arbitrarily, without looking at the total power the property will draw. The regulation sets basic electrification as the minimum system for the interior installation of homes in new buildings; when an existing installation is renovated, the REBT applies to the part that is modified, repaired or extended. Its design allows common appliances to be used safely, with a minimum theoretical power of 5,750 W at 230 V. But this limit is exceeded very easily once modern heating equipment is added or the living space is substantially extended.
The REBT is firm on this point. You must move to elevated electrification if at least one of the cases set out in the regulation applies:
- The useful floor area of the home is more than 160 square metres of computable space.
- Electric heating (for example, radiators or radiant panels) is planned.
- Air conditioning is planned.
- A separate clothes dryer is planned in the utility room.
- The number of lights and fixed lighting points across the ceilings is strictly more than 30.
- The general power sockets of the property exceed 20 outlets.
- More than 6 wet-area outlets are needed in bathrooms or for combined kitchen worktop services.
- Home automation and energy-management systems, or an electric vehicle charging installation in a detached house, are planned.
Breaking down ITC-BT-25: the anatomy of independent circuits
Under the technical umbrella of complementary instruction ITC-BT-25, the internal installation must be run through what are called independent circuits. Each of these runs a single route from the protection consumer unit and has a cable gauge and a miniature circuit breaker calibrated to fit. In a traditional basic electrification, five essential circuits are deployed: C1 for the entire lighting network, C2 for the general sockets and the fridge, C3 for the induction hob and the conventional kitchen oven, C4 for the heavy-start large appliances (washing machine, dishwasher and storage water heater), and C5 for the sockets on the kitchen and bathroom worktops.
But the development of the REBT includes a useful nuance that helps avoid unjustified jumps in grade. The regulation allows what is known as splitting circuit C4. By physically separating the washing machine, dishwasher and water heater into three independent circuits, each protected individually by 16 A miniature circuit breakers, you avoid overloading a single 4 mm² line. Crucially, this preventive split, if carried out in line with the explanatory note to ITC-BT-25, does not mean the administrative obligation to raise the general installation to an elevated grade, making safer and more logical renovations possible without an extra bureaucratic cost with the distributor.
So you can see the exact technical differences the REBT prescribes for each residential circuit type, we have drawn up a detailed technical diagram of cable sections, protection ratings and the minimum diameters of the corrugated plastic conduits that must be installed inside brick walls or plasterboard panels in your home.
| Circuit | Direct use | Conductor section (mm²) | Circuit breaker (A) | Corrugated tube diameter (mm) | Maximum points of use |
|---|---|---|---|---|---|
| C1 | Lighting and fixed lampholders | 1.5 | 10 | 16 | 30 light points |
| C2 | General common-use sockets | 2.5 | 16 | 20 | 20 sockets |
| C3 | Ceramic hob and oven | 6.0 | 25 | 25 | 2 dedicated sockets |
| C4 | Washing machine, dishwasher, water heater | 4.0 | 20 | 20 | 3 dedicated sockets |
| C5 | Auxiliary sockets for kitchen and bathroom | 2.5 | 16 | 20 | 6 auxiliary sockets |
| C8 | Dedicated electric heating | 6.0 | 25 | 25 | No specific limit |
| C9 | Air conditioning and climate control | 6.0 | 25 | 25 | Fixed connection point |
| C13 | Electric vehicle charging | As calculated (ITC-BT-52) | 10 to 40 A depending on power (ITC-BT-52) | According to cable section (ITC-BT-19) | See ITC-BT-52 |
The General Control and Protection Panel (CGMP): the brain and shield of the home
The residential consumer unit is the main technological shield that guards the flow of current. ITC-BT-17 and ITC-BT-25 set out strictly which protective elements must be present inside this plastic or metal enclosure. If you want to know in full detail each part of this central box, what it consists of and the right moment to renew the installation safely, read our in-depth article on what a home consumer unit is: components, regulations and when to renew it.
Under the current technical regulation, a general panel must not hold its cables in a disorderly way. It must follow a strict and functional hierarchy of incoming supply and distribution:
- Main Automatic Switch (IGA): This is the first guardian of the entire electricity supply into the home, protecting both the internal circuits and the individual supply line against severe short circuits and high-intensity overall thermal overloads. The law requires the minimum rated current of the IGA to be 25 amps.
- Surge protector, permanent and transient (PCS): ITC-BT-25 includes it “if necessary, in line with ITC-BT-23”, and that instruction treats it as necessary when the installation is fed by an overhead line. With an underground supply it is not required, but it can be added for safety, for example to protect the delicate electronic control boards in appliances, televisions, home automation and chargers. It instantly prevents accidental voltage variations on the distributor's external supply network from destroying your household equipment.
- Residual current devices (RCD): These exist solely to protect people's lives by detecting tiny residual current leaks of up to 30 milliamps (mA) to the building's earth. ITC-BT-25 requires, in both basic and elevated electrification, at least one residual current device for every five circuits installed, so that an accidental leak does not have to cut the supply to the whole home.
- Miniature circuit breakers (PIA): Also known as individual thermal-magnetic breakers, these act as local protection for each of the circuits (C1, C2, C3, C4, C5). They are sized thermally to protect the copper conductor cross-section and avoid serious heat-related fire risks.
The electrical certificate (CIE) and the General Protection Box (CGP) in your paperwork
When you buy a flat and decide to carry out a full renovation of its spaces, it is very common to need an increase in the contracted power to accommodate modern equipment such as a high-speed induction hob. That is when the distributors' administrative process comes into play, which inexorably demands the submission of an electrical installation in a home: complete guide (consumer unit, circuits, certificate and regulations) to confirm the technical limits and operation of your equipment.
Do not forget the key document: the Electrical Installation Certificate. To understand which body issues it, what it costs and the detailed steps to obtain it in regional capitals, see our guide to what the electrical certificate (CIE) is, what it is for and how to obtain it in Barcelona.
But electrical installations in homes do not start at the consumer unit in your hallway. The origin of the chain, and the boundary of technical responsibility between the external distributor and the private owner, lies at the building's façade or entrance. We mean the CGP, an external device whose operation, safety rules and maintenance criteria are set out step by step in the article on what the General Protection Box (CGP) is: its function, regulations and when it is replaced. If the shared network is deteriorated or the CGP fuses are outdated, the distributor will reject your certificate, which will force you to act with the community before you can enjoy more kilowatts in your home.
Renovating older buildings: common technical, regulatory and financial challenges
If you are planning to renovate an old building, you will almost immediately run into serious electrical faults that call for firm measures. Homes built in the 60s or 70s often lack an earth connection at living room or bedroom sockets, have old copper wires of ridiculously small section or, far worse, flexible aluminium conductors that degrade very quickly. Given this picture, it is essential to be clear about the type of works and plan them legally to avoid bureaucratic complications with your town hall or your neighbours.
If the scale of the renovation affects main architectural elements, or if you are considering changing the general layout of the property at its roots, be sure to assess whether you need an architect or technical architect for a renovation in Barcelona. Their professional judgement will give the work formal soundness and take care of the building licences the community requires.
On the financial side, do not be discouraged by the high costs linked to strict compliance with the REBT. When you fully update your lighting, air conditioning and home automation, you can not only qualify for the reduced 10% VAT rate on renovations, when it applies and how to benefit from air conditioning and domestic electrical installations, but you will also significantly improve the rating of your energy certificate, what it is for in a renovation and how to improve it by cutting unnecessary heat losses.
To avoid legal errors or oversights that could cost you substantial fines or delays of months, plan the preparation of the certificates and legal documents for renovations in Barcelona: complete guide for your area before paying any deposit to suppliers or self-employed renovators.
Recurring safety mistakes made by DIY enthusiasts
- Disorderly branch circuits: Chaotically doubling cables of different sections in temporary joins under the same insulating tape, causing unwanted short circuits that destroy appliances.
- Overfilled corrugated plastic tubes: Forcing multiple cables physically through narrow 16 mm guides that are poorly supported, which can overheat the whole integrated system behind the plasterboard panels.
- Wrong conductor colours: Ignoring the internationally agreed colour coding for neutral and live cables out of ignorance, which can cause serious accidents from direct and indirect electric contact.
- No residual current device: Keeping old rustic consumer units that lack suitable residual-current protection, neglecting the safety of the people who live in the home.
Frequently asked questions about REBT rules for homes (FAQ)
It is compulsory if your home exceeds 160 useful square metres, or if you plan to install electric heating, air conditioning, a dryer, more than 30 lights, more than 20 general sockets, more than 6 wet-area outlets or an electric vehicle charging installation in a detached house.
An installation without an earth conductor is highly dangerous. The REBT applies to new installations and, in existing ones, to the part that is modified, repaired or extended, provided the measures needed to keep the whole installation safe are taken; in addition, the competent body of the regional government can apply it to an existing installation whose condition poses a serious risk. Before a renovated installation is put into service, the installation company that carried out the work must verify it.
ITC-BT-25 requires the supply for the kitchen and the electric oven to be run with conductors of a minimum section of 6 mm² and a 25 A miniature circuit breaker that cuts all poles (omnipolar).
Yes, it is perfectly feasible. C4 may be split into three independent circuits without changing to the elevated grade or adding extra residual-current devices, which makes for a cleaner renovation.
Sources
Keep reading
Home automation in a renovation: KNX, Zigbee and smart home
Plan home automation into your full renovation. We compare KNX reliability, Zigbee flexibility and what Matter brings. An expert guide for 2026.
InstallationsWhat is the REBT? The low-voltage electrotechnical regulation
What the REBT is, Spain's low-voltage electrical regulation, its technical instructions (ITC-BT) and the key changes that affect homes in 2026.
InstallationsWhat is the ICP (power control switch)?
What the ICP power control switch is, how the old physical device became a digital meter limit, and how it affects your renovation work in 2026.

