Bathrooms

Changing a bath for a shower in Barcelona: cost, timing and ideas

Everything you need to know about swapping a bath for a shower tray in Barcelona: what it costs, how long it takes and which options work best.

By the Tu Nuevo Piso teamPublished 28 June 20266 min read

Indicative prices · VAT not included. Not a binding offer.

Swapping a bath for a shower is a very common bathroom renovations in Barcelona, and it makes sense. You gain usable space, the bathroom becomes easier to use and to keep clean, and the work is contained. In most flats it is finished in a few days. In this guide we explain how much it costs, how long it takes, which materials work best and how to avoid the usual mistakes, with guide prices for Barcelona and Catalonia in 2026.

Why swap the bath for a shower

Beyond looks, replacing the bath with a shower tray brings some very concrete benefits in everyday life:

  • More space and a feeling of openness. A well-planned shower frees up the area the bath took up. With a clear glass screen, the bathroom feels noticeably bigger.
  • Accessibility. A flush tray removes the step over the bath, which is the main fall risk for older people or anyone with limited mobility.
  • Hygiene and maintenance. Fewer joints and corners, and non-slip materials that take seconds to clean.
  • Water saving. A shower uses far less water than filling a bath, which shows up on the bill at the end of the month.
  • Property value. An updated bathroom is one of the points that count most when you sell or rent a flat in Barcelona.

Price to change a bath for a shower in Barcelona

The price depends mainly on the type of tray, the taps and the screen, and on whether the tiling or the plumbing has to be redone. These are the guide ranges for 2026 for a standard bathroom in Barcelona:

Type of workWhat it includesGuide price
Basic swapBath removal, resin tray, standard screen, basic taps, tiling trim around the area1,200 – 1,800 €
Mid-range swapMade-to-measure slim tray, toughened glass screen, thermostatic taps, partial new tiling1,800 – 2,800 €
Premium / accessible swapBuilt-in shower or microcement, flush tray, made-to-measure screen, high-end taps, full tiling2,800 – 4,500 €

These are guide prices only. The final cost depends on the state of the plumbing and drains, the metres of tiling to be replaced and the finishes you choose. If you are considering a wider project, our guide to full renovation prices in Barcelona shows how the bathroom fits into the overall budget.

What the swap involves, step by step

A well-done bath to shower change always follows the same stages:

  1. Protection and removal. The rest of the bathroom and the flat are protected, and the bath and its panel are taken out.
  2. Checking the plumbing. The drain and the water supply are checked. This is the ideal moment to correct the slope or replace old pipework.
  3. Preparing the base. The base is levelled and the slope towards the drain is formed, to make sure water drains properly.
  4. Fitting the tray or building the shower. The tray is installed, or the built-in shower is constructed, with its waterproofing.
  5. Tiling and finishes. The tiling in the area is trimmed or renewed and sealed, and the screen and taps are fitted.
  6. Testing. Watertightness and drainage are checked before the job is considered finished.

Shower tray types: which to choose

Resin tray

This is the best-selling option because it balances price, a non-slip surface and a wide choice of colours. It is cut to size and can be finished to look like stone or slate.

Ceramic or stoneware tray

Very hard-wearing and easy to clean, with a more classic look. Sizes are more fixed than with resin.

Built-in shower and microcement

The most integrated and attractive option: a continuous shower with no visible joints, made entirely to measure. Microcement works well here because it creates a waterproof surface with a premium look on both floor and walls. The waterproofing has to be done properly, so leave this to an experienced team.

Screens and taps

The screen largely determines the visual result. Clear toughened glass screens make the room feel more open, and sliding ones are practical in narrow bathrooms. For taps, a thermostatic mixer is highly recommended: it keeps the temperature steady and avoids sudden changes, which is especially useful if there are children or older people at home.

How long the work takes

A standard bath to shower change usually takes 2 to 4 working days. If all the tiling is renewed, or a built-in shower with microcement is made, the timescale can extend to 5 or 7 days because of setting and curing times. Treat the bathroom as out of use during that time and, if it is the only bathroom in the flat, arrange an alternative.

Do you need a licence to change a bath for a shower?

In most cases this is a minor renovation that does not change the layout or structural elements, so a prior notification or a minor works licence is enough, depending on the town hall. It is still worth checking. We explain it in detail in our guide to the works licence in Barcelona. A good renovation company will handle the paperwork for you.

Accessibility: making the bathroom a safe space

If the goal is to improve safety, then beyond the flush tray it is worth considering: non-slip flooring (class 3), grab bars, a fold-down seat and taps that are easy to use. These are affordable upgrades that make a real difference to independence and fall prevention.

Mistakes to avoid

  • Skimping on waterproofing. It is one of the main causes of later damp. Never save money here.
  • Wrong drainage slope. A badly levelled tray leaves water standing. The slope has to be calculated properly.
  • Choosing on price alone. A very low quote often hides low-quality materials or unfinished details.
  • Not planning ventilation. A shower produces more steam, so check the extractor to avoid mould.

Frequently asked questions

Can you change a bath for a shower in one day?

In very simple cases, with a prefabricated tray and no new tiling, it is possible in one long day. For a good finish, the usual recommendation is 2 to 4 days.

How much space do you gain?

It depends on the original bath, but it is common to recover between 20 and 40 cm of usable width, as well as the visual sense of space that a clear screen gives.

Which is better, resin or microcement?

Resin offers the best value for money and a quick fit. Microcement is the most attractive and durable option for a built-in shower, at a slightly higher cost.

Can I keep my current tiles?

Yes. If they are in good condition, only the affected areas are trimmed. If you want a complete change of look, it is a good time to renew the tiling or apply microcement.

What is the price to change a bath for a shower tray in Barcelona?

The price to change a bath for a shower tray in Barcelona starts from about 1,200 € excluding VAT for the standard version: removal, waterproofing, tray, tiling for the area and screen. Bath to shower changes with a built-in tray, niches or concealed taps cost more than this. The exact bath to shower cost in Barcelona is quoted once we have seen the bathroom.

Conclusion

Swapping a bath for a shower is one of the renovations with the best return. It improves comfort, safety and the value of your flat in a few days, on a contained budget. The key is good waterproofing, a properly calculated slope and materials that suit how you use the bathroom. At Tu Nuevo Piso we carry out bath to shower changes across Barcelona and Catalonia with a fixed quote, clear timescales and quality finishes. Thinking about the kitchen too? We can plan both jobs together to save time and cost.

Keep reading

✆ Call✦ WhatsAppGet a quote →